It is strictly forbidden to press the LED light with sharp hard objects

The light strip is LED lamp beads welded on the flexible circuit board with a special processing technology, and the product is powered on and lit after the installation of the product, mainly as a decorative lighting application. The commonly used type is 12V, 24V low-voltage light strip, in order to avoid damage to the light strip caused by errors during the use and installation operation, it is strictly forbidden to operate with electricity in the installation of the light strip product.

What is the difference between LED high voltage light strip and low voltage light strip?

LED light strip is often used to outline the outline of various buildings, according to the difference in the use of LED light strip and the same requirements for light strip, there are two kinds of "high-voltage LED light strip" and "low-voltage LED light strip".

Classification of LED strip lights - how to detect good or bad LED strips?

At present, LED light strip products on the market are mainly lamp bead patches, using SMD patch technology to package various specifications of lamp beads, soldered on flexible circuit boards, whether it is chip packaging glue dripping or patch welding, the domestic has been all mechanized and automated. This improves efficiency, reduces labor, and the price is very close to the people.

LED high pressure strip light

Material: 2835, 5050 lamps a variety of LED lamp beads, FPC flexible circuit board, resistance, solder paste, silicone plug, plastic sleeve, wire and other composition. Usually a roll of 100 meters, can be cut according to the marked scissor edge at will, easy to use in a variety of home or commercial environment decoration. The usual high-voltage light strips are divided into single and double rows. The thickness is 8mm, the width is 11-17mm, the weight is 0.25kg per meter, one meter 36 beads, and the power of a single lamp bead is 0.06W.

LED light strip is the LED light assembled on the ribbon PCB flexible linear circuit board

The true face of LED light strips, just like a belt, plus the use of LED light sources, as the name suggests, called LED light strips, directly connected to 220V mains power can be on, fixed with a fixed card, it is not difficult to use. LED light strip is born in recent years, with the development of LED technology, in the absence of LED light strip, T4, T5 lamp tube to do backlight, but T4, T5 lamp minimum size is 0.3 meters, which means that if there is less than 0.3 meters, it will leave a dark area, and LED light strip, uniform light, and can be cut according to the actual length, very convenient, plus red, green, blue, yellow, white, warm white and so many other light colors to choose from, and even colorful changes, Now basically rarely use T4 and T5 tubes, and use LED light strips instead!

LED light strip how many watts per meter

The power of one meter of light strip is between 10 watts and 20 watts, depending on the number of lamp beads. Taking ordinary lamp beads as an example, the power of each lamp bead is about 0.2 watts to 0.3 watts, assuming that the number of lamp beads per meter is 50, the power of that meter is 0.2 * 50 = 10 watts. Different LED strips are different, and they need to be calculated according to their current and voltage to calculate the power. Power is a measure of the rate of transmission of energy, and in DC circuits it is the product of voltage V and current A; In communication systems, it's much more complicated. Whether it is high-voltage or low-voltage LED strip lights, they convert AC to DC to work.