No data
LED light strip is the LED light assembled on the ribbon PCB flexible linear circuit board
Release Time：
2021-11-12 11:01
Source：
Introduction of led strip light
The true face of LED light strips, just like a belt, plus the use of LED light sources, as the name suggests, called LED light strips, directly connected to 220V mains power can be on, fixed with a fixed card, it is not difficult to use. LED light strip is born in recent years, with the development of LED technology, in the absence of LED light strip, T4, T5 lamp tube to do backlight, but T4, T5 lamp minimum size is 0.3 meters, which means that if there is less than 0.3 meters, it will leave a dark area, and LED light strip, uniform light, and can be cut according to the actual length, very convenient, plus red, green, blue, yellow, white, warm white and so many other light colors to choose from, and even colorful changes, Now basically rarely use T4 and T5 tubes, and use LED light strips instead!
LED strip light types
At present, the commonly used types of LED strips are 3528 and 5050 strips, the difference between the two is on the one hand the size is different, on the other hand, there are 5050 LED chips in the 3 lamp beads, and only 3528 LED chip in 1. Therefore, under the same number of lamp beads, the brightness of 5050 LED strip light is 3528 times that of 3 LED strip, and the power is also 3 times, and the price is more expensive.
Related News
LED soft light strip is also called LED flexible light strip
Introduction to LED strip light. LED soft light strip, also known as LED flexible light strip, is mainly composed of SMDLED lamp beads, FPC (flexible PCB), resistance, etc. The main LED lamp beads used in LED soft light strips on the market are SMD3528, SMD5050,
Neon strip and flexible strip light difference
Compared with glass neon tubes, LED soft light strips have the following advantages:
It is strictly forbidden to press the LED light with sharp hard objects
The light strip is LED lamp beads welded on the flexible circuit board with a special processing technology, and the product is powered on and lit after the installation of the product, mainly as a decorative lighting application. The commonly used type is 12V, 24V low-voltage light strip, in order to avoid damage to the light strip caused by errors during the use and installation operation, it is strictly forbidden to operate with electricity in the installation of the light strip product.
What is the difference between LED high voltage light strip and low voltage light strip?
LED light strip is often used to outline the outline of various buildings, according to the difference in the use of LED light strip and the same requirements for light strip, there are two kinds of "high-voltage LED light strip" and "low-voltage LED light strip".
Classification of LED strip lights - how to detect good or bad LED strips?
At present, LED light strip products on the market are mainly lamp bead patches, using SMD patch technology to package various specifications of lamp beads, soldered on flexible circuit boards, whether it is chip packaging glue dripping or patch welding, the domestic has been all mechanized and automated. This improves efficiency, reduces labor, and the price is very close to the people.
Material: 2835, 5050 lamps a variety of LED lamp beads, FPC flexible circuit board, resistance, solder paste, silicone plug, plastic sleeve, wire and other composition. Usually a roll of 100 meters, can be cut according to the marked scissor edge at will, easy to use in a variety of home or commercial environment decoration. The usual high-voltage light strips are divided into single and double rows. The thickness is 8mm, the width is 11-17mm, the weight is 0.25kg per meter, one meter 36 beads, and the power of a single lamp bead is 0.06W.
CONTACT US
Showroom:No.7,Building 10,RuiFeng Lamp Matching City,Guzhen,ZhongShan City,Guangdong Province,P.R.C
Factory address:1st and 2nd Floor, Building 2, No.21, Fuqing 2nd Road, Henglan Town, Zhongshan City, Guangdong Province, CHINA
HK JIAYANG ELECTRONIC CO.,LIMITED
FLAT/RM 1405B 14/F THE BELGIAN BANK BUILDING NOS. 721-725 NATHAN ROAD MONGKOK KL